LOGIC Unvented Hot Water Systems course

This LOGIC Unvented Hot Water Systems course is aimed at plumbers and heating engineers wanting to legally install, service or commission domestic  hot water systems in the UK. It is a legal requirement of the building regulations that all domestic unvented hot water systems over 15 litres capacity are maintained by a qualifed person. A qualified person is someone who holds a current recognised Unvented Hot Water Storage certificate. This LOGIC Unvented Hot Water Systems course provides such a certificate. PPL also runs the Bpec Unvented Hot Water Systems course should the person prefer the Bpec qualification.

The certifcate is valid foir 5 years after which the holder must attend an approved centre and take an unvented hot water re-assessment course such as LOGIC Unvented Hot Water Systems (Upgrade).

This qualification is also valid for solar hot water engineers who must gain an unvented hot water course certificate as a prerequisite of attending the Bpec Solar Hot Water course.

Holders of current unvented hot water certifcates which are due to expire (they have a 5 year validity period from issue) should take our 1/2 day LOGIC Unvented Hot Water Systems (Upgrade).

All candidates will receive £225 in CASH BACK vouchers from Santon. After completing the course and registering with Santon you will be able to claim £15 in cash back for every Santon Unvented Hot Water system purchased.

Please see the practical theory tab for more information on this LOGIC Unvented Hot Water Systems course.

LOGIC Unvented Hot Water Systems course theory overview:

The theory course is taught in our modern well equipped training rooms and covers the following topics. The sessions are lively and interactive:

Module 1 -  Induction to the course
Course program, introductions, general procedures for training and assessment.

Module 2 -  Domestic Hot Water Supply
The options for supplying domestic hot water including; conventional heating systems, storage water heaters (electric), bulk storage water heaters, water jacketed tube heaters, combination boilers

Module 3 -  Regulations
Covers the legal requirements for domestic unvented hot water systems including BS 6700, BBA, Water Regulations fluid categories, Building regulations

Module 4 -  What is an unvented hot water system?
Introduction to concepts of unvented hot water systems including advantages and disadvantages, controls, safety, expansion of water

Module 5 -  Design of Unvented Hot Water systems
Direct fired systems and indirect fired. Size and capacities of unvented hot water systems

Module 6 -  Installation of Unvented Hot Water systems
Pipework runs, discharge pipework, commissioning, cold water supply, hot water supply, controls, sealed heating systems, safety checks

There is an open book multiple choice examination at the end of the days training together with a practical fault finding session.

Please take a moment to look at the practical overview tab for the LOGIC Unvented Hot Water Systems course.

LOGIC Unvented Hot Water Systems course theory overview:

Practical training sessions for this unvented hot water course take place on our purpose built unvented hot water training rigs. These unvented rigs allow the experienced unvented tutor to safely simulate dangerous situations that can occur on the unvented systems.

The unvented practical training covers the installation, commissioning and maintenance of unvented hot water systems.

The Hot Water Association Guide to Unvented Hot Water Storage can be downloaded below:

 Click here to download - HWA Guide to Unvented Systems (Size 284K) 

It will open in a separate webpage if you have a pdf reader installed on your PC/MAC. If you do not have a pdf reader please visit the link below to get a free copy:

Please take a moment to look at the FAQs tab for the LOGIC Unvented Hot Water Systems course.

LOGIC Unvented Hot Water Systems course theory FAQs:

Key course facts:

Course times: 9am until 4.30pm 
Course duration: 1 day
Payment: Full balance on booking 
Assessment method: Written and practical assessments 
Valid for: 5 years

Q - Who is the course aimed at?

A - The course is aimed at plumbers and heating engineers wanting to legally install, service or commission domestic  hot water systems in the UK. It is a legal requirement of the building regulations that all domestic unvented hot water systems over 15 litres capacity are maintained by a qualifed person

Q - What are the assessment procedures for this Unvented Hot Water Systems course?

A - There is one open book multiple choice examination and a practical fault finding test.

Q - What happens if I fail the course?

A - Like most PPL courses if you fail the Unvented Hot Water Systems examination you will be offered a resit free of charge.

Q - How do I get more information about the LOGIC Unvented Hot Water Systems course?

A - Call us on 0845 2600 966 or request a brochure pack

Q- How do I book a place on the  LOGIC Unvented Hot Water Systems course?

A - Book online for your chosen date or call us on 0845 2600 966.

Q- Where do people come from to take LOGIC Unvented Hot Water Systems course?

A - We train people from all over the UK for the LOGIC Unvented Hot Water Systems course, York, North Yorkshire, West Yorkshire, South Yorkshire Humberside, Newcastle, Sunderland, Middlesbrough, Hull, Durham, London, Manchester, Leeds, Birmingham, Glasgow, Edinburgh, Devon, Bristol, East Anglia, North West, Yorkshire, North East, South East, South West, Derbyshire, they come from national plumbing and heating companies, self-employed plumbers, builders, gas engineers and renewable energy engineers.

For more general frequently asked questions please see our main FAQ page.