Authorised Person/SAP High Voltage - Commercial and MOD Sectors (APHV3)

£1,280 + VAT
5 Days
YorkSlough and On-site.
Course Overview
This City & Guilds accredited course will enable you to gain the additional knowledge required to carry out Authorised Person/Senior Authorised Person duties and responsibilities in order to achieve compliance with the requirements of the Electricity at Work Regulations 1989 and implement mandatory standards, such as MOD’s JSP 375 Vol 3 (as a standard reference) or company electrical safety rules.

Please note we have the ability to offer this course on-site at client premises and on a bespoke basis.
High Voltage Practical Facilities
Busbar within High Voltage Systems
Overview of the High Voltage Ring 1 in York
Who is This Course For?
This course is aimed at experienced engineering staff with responsibility for the control, operation or maintenance of installed high voltage systems and who may be appointed as Senior Authorised Person (Electrical High Voltage). It is also suitable for existing High Voltage Authorised Persons looking for HVAP/SAP refresher.

Take a Look Around


Key Learning Areas
  • Requirements for safe operation of high voltage systems
  • High voltage distribution switchgear and equipment
  • High and Low voltage distribution systems
  • High voltage working and operation
  • Safe isolation around standby power supplies and equipment
  • Roles and duties of the Authorised Person/Senior Authorised Person
  • Practical implementation of Safe Systems to establish safety rules
  • Completion of safety documents through practical exercises
  • High Voltage protection
  • Electricity at Work Regulations 1989 and the published guidance available

Course Schedule
Day Time Morning Afternoon
One
10:00
-
17:00
  • Introduction
  • High Voltage Distribution Systems
  • High Voltage Switchgear
Two
09:00
-
17:00
  • Electrical Safety Rules
  • Roles & Duties
  • High Voltage Working
  • Safety Documentation Exercise(s)
Three
09:00
-
17:00
  • Safety Documentation Exercise(s)
  • High Voltage Protection Systems
  • Practical & Documentation Exercise(s)
Four
09:00
-
17:00
  • Practical & Documentation Exercise(s)
  • Review of Evening Exercise(s)
  • Practical & Documentation Exercise(s)
Five
09:00
-
14:30
  • Documentation Assessment(s)
  • Technical Assessment(s)

Course Training Team

staffImage

Graham Taylor MIET

HV/LV Electrical Systems Training Manager

Graham is a HV/LV Electrical Systems Training Manager and has over 35 years experience in the electrical industry and a further 9 years teaching Safe Systems of Work courses.

graham-taylor kevin-burbidge stephen-harnden heather-beaumont ian-bryant steve-danby allan-johns don-maccallaugh

Upcoming Course Dates
Slough
Monday, 2nd December 2019
End date: Friday, 6th December 2019
York
Monday, 9th December 2019
End date: Friday, 13th December 2019
Slough
Monday, 20th January 2020
End date: Friday, 24th January 2020
York
Monday, 27th January 2020
End date: Friday, 31st January 2020
Slough
Monday, 17th February 2020
End date: Friday, 21st February 2020


View Our High Voltage Training Equipment And Rings
Request More Information
We'll never share your details with anyone else.