Authorised Person Electrical Low Voltage (HTM 06-02) (APLVH)

£1,325 + VAT
5 Days
York and Slough.
Course Overview
This City & Guilds accredited course will enable you to gain the knowledge required to carry out Authorised Person duties and responsibilities in order to achieve compliance with the requirements of the Electricity at Work Regulations 1989. The course is based on the specific requirements of Health Technical Memorandum (HTM) 06-02 Electrical Safety Guidance for Low Voltage Systems.

Please note we have the ability to offer this course on-site at client premises and on a bespoke basis.
Who is This Course For?
This course is aimed at experienced engineering staff with the responsibility for the control, operation or maintenance of installed low voltage systems within healthcare environments and also those who may be appointed as Authorised Person (Electrical Low Voltage).
Start Date End Date Location Price (Ex. Vat)
Mon, 2nd August 2021 Fri, 6th August 2021 Slough £1325
Mon, 9th August 2021 Fri, 13th August 2021 York £1325
Mon, 13th September 2021 Fri, 17th September 2021 Slough £1325
Mon, 20th September 2021 Fri, 24th September 2021 York £1325
Mon, 11th October 2021 Fri, 15th October 2021 York £1325
Mon, 15th November 2021 Fri, 19th November 2021 Slough £1325
Mon, 13th December 2021 Fri, 17th December 2021 York £1325
Mon, 17th January 2022 Fri, 21st January 2022 Slough £1325
Mon, 7th February 2022 Fri, 11th February 2022 York £1325
Mon, 14th March 2022 Fri, 18th March 2022 Slough £1325
Mon, 28th March 2022 Fri, 1st April 2022 York £1325
Mon, 4th April 2022 Fri, 8th April 2022 Slough £1325

Day Morning Afternoon
One
  • Introduction
  • Dangers of Electricity & Regulations
  • Low Voltage Distribution Systems & Equipment
  • Walk Around
Two
  • Requirements of HTM 06-02 Roles & Duties of Personnel Documentation
  • Low Voltage Working Procedures Classroom Exercise
Three
  • Live Working
  • Standby Systems
  • Documentation Exercise(s)
Four
  • Documentation Exercise(s)
  • Documentation Exercise(s)
Five
  • Documentation Exercise(s)
  • Procedural & Technical Assessment
  • Requirements of Electricity at Work Regulations
  • Working procedures to HTM 06-02
  • Low voltage equipment including switchgear and protective devices
  • Appointment and auditing procedures
  • Requirements of BS7671 with regards to Health Technical Memorandum (HTM)
  • Roles and duties of personnel
  • Safe isolation of standby power supplies and equipment
  • Monitoring and control of work undertaken by contractors
  • Completion of log books and associated documentation
Prior to attending this course we recommend you have completed the following or their equivalent and possess:
Background knowledge or experience working within an electrical role.
Everything you require for this course is provided
Course Training Team

staffImage

Graham Taylor MIET

HV/LV Electrical Systems Training Manager

Graham is a HV/LV Electrical Systems Training Manager and has over 35 years experience in the electrical industry and a further 9 years teaching Safe Systems of Work courses. Graham specialises in Electrical High and Low Voltage training courses and has extensive experience which including working in the following areas: Maintenance engineer, Maintenance Management, Project Management as well as Electrical duty holder positions. Graham has worked within a wide range of different electrical roles in various different industries including the automotive, food and print sectors, where his responsibilities included electrical installations and repairs as well as managing large engineering projects. He has also carried out Electrical Authorised Person roles in both high and low voltage disciplines.

staffImage

Kevin Burbidge

Electrical Installations Training Manager

Kevin is a senior electrical training consultant with over 30 years experience in the electrical industry. He specialises in electrical high and low voltage training courses including electrical installation testing and authorised person training for the commercial, healthcare and defence sectors. Kevin has worked as an electrical/mechanical engineer for various organisations and was an engineering project manager for 6 years specialising in research and development projects for Royal Mail. Kevin has also carried out electrical authorised person roles in both high voltage and low voltage disciplines.

staffImage

Ian Bryant

Senior Electrical Training Consultant

Ian is a Senior Electrical Training Consultant with over 20 years experience served at RAF Fylingdales. During this time he was an Authorised Person with duties in Mechanical and Electrical disciplines. Ian has also held positions within the commercial and industrial sectors as an Engineer, Project Manager and Lead Engineer.

staffImage

Allan Johns

Senior Electrical Training Consultant

Allan has been in the electrical world in various industries for around 40 years since starting as an apprentice in construction installation. He has worked within the Commercial Diving, Facilities Management, Commercial and Leisure Marine as well as the Film industry mainly based within the electrical sectors of these but also covering the safety side of these areas.

staffImage

Paul Davey

Senior Electrical Training Consultant

Paul is a highly skilled electrical engineer with extensive experience of testing, installation and maintenance of electrical equipment.


Customer Questions

Q: What is the difference between Authorised Person Low Voltage and Authorised Person Low Voltage HTM 06-02?
A: Authorised Person Low Voltage is aimed at experienced engineering staff within the MOD and Commercial sectors. The Authorised Person Low Voltage HTM 06-02 is based on the specific requirements of Health Technical Memorandum (HTM).
Q: What is an Authorised Person?
A: An Authorised Person is defined as someone who has been formally authorised in writing to undertake a role.
Need more information or have a question about this course? Click ask a question to start a chat.
Request More Information
We'll never share your details with anyone else.
The majority of our images were taken pre-covid and do not replicate the control measures we currently have in place